NovaStar VX400

Description of the
NovaStar VX400

The VX400 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 4 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX400 unit can drive up to 2.6 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.

The VX400 is capable of receiving a variety of video signals and processing high-resolution images. In addition, the device features stepless output scaling, low latency, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.

What’s more, the VX400 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your in- field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.

Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX400 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.

Certifications

If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

• 1x HDMI 3

• 1x DVI (IN & LOOP)

• 1x 3G-SDI (IN & LOOP)

• 1x optical fiber port (OPT1)

Output connectors4x Gigabit Ethernet ports
A single device unit drives up to 2.6 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.

2x Fiber outputs
OPT 1 copies the output on 4 Ethernet ports.

OPT 2 copies or backs up the output on 4 Ethernet ports.

1x HDMI 3
For monitoring or video output

Self-adaptive OPT 1 for either video input or sending card output
Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.

Audio input and outputAudio input accompanied with HDMI input source
Audio output via a multifunction card
Output volume adjustment supported
Low latency
Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.

2x layersAdjustable layer size and position
Adjustable layer priority
Output synchronization
An internal input source can be used as the sync source to ensure the output images of all cascaded units in sync.

Powerful video processingBased on SuperView III image quality processing technologies to provide stepless output scaling
One-click full screen display
Free input cropping
Automatic screen brightness adjustment
Adjust the screen brightness automatically based on the ambient brightness collected by the external light sensor.

Easy preset saving and loading
Up to 10 user-defined presets supported

Multiple kinds of hot backupBackup between devices
Backup between Ethernet ports
Mosaic input source supported
The mosaic source is composed of two sources (2K×1K@60Hz) accessed to the OPT 1.

Up to 4 units cascaded for image mosaic
Three working modesVideo Controller
Fiber Converter
Bypass
All-round color adjustment
Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma

Pixel level brightness and chroma calibration
Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality.

Multiple operation modes
Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.

คลิ๊กเพื่อดาวน์โหลดเสป็กชีท